HDCVI Standalone DVR User’s Manual
Here is for you to select working mode when hard disk is full. There are
two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next
HDD is not empty, then system overwrites the previous files.
It is for you to specify record duration. There are two modes: Time
length/File length.
Time length: It is to pack according to time length. The value
ranges from 1 to 60 minutes. Default value is 60 minutes.
File length: It is to pack according to file length. The value ranges
from 128M to 2048M. Default value is 1024M.
Here is for you to set auto logout interval once login user remains
inactive for a specified time. Value ranges from 0 to 60 minutes.
Once you check the box here, system will go to the startup wizard
directly when the system restarts the next time. Otherwise, it will go to
the login interface.
Check the box here, system displays the navigation bar on the
interface.
You can input an interval here to synchronize the DVR time and IPC
time.
5.8.5.1.2 Date and time
The date and time interface is shown as in Figure 5-96
Figure 5-96
Please refer to the following sheet for detailed information.
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
To Next Page
Loading...
