HDCVI Standalone DVR User’s Manual
In Figure 4-24, there are two ways for you to call the menu and set.
a) Click “Iris +” to call the OSD menu of the HDCVI camera. See Figure 4-22. Use
direction buttons to select the parameters and click the “Iris +” to confirm.
Figure 4-22
b) Click , you can view menu operation interface. See Figure 4-23. Click the Enter
button, you can see the OSD menu of the HDCVI camera. See Figure 4-22. Use
direction buttons to select the parameters and click the “OK” to confirm.
Figure 4-23
4.5.3.2 PTZ Setup
In Figure 4-20, click to open the menu, you can set preset, tour, pattern, scan and
etc. See Figure 4-24.
To Next Page
Loading...
