Local Configurations 288
When Type is IP Address, they can be configured. Start Port and
End Port can be configured only in Network Access Type.
Enter Start Address and End Address of IP Segment.
When Type is IP Segment, they can be configured.
Enter MAC Address that is allowed or forbidden.
When Type is MAC Address, it can be configured.
Table 5-77
Click Apply to complete the settings. Step 4
5.19.3.2 Configuring System Service Settings
You can enable or disable the system internal services.
Select Main Menu > SYSTEM > SECURITY > System Service. Step 1
The System Service interface is displayed. See Figure 5-262.
Figure 5-262
Configure the parameters. For details, see Table 5-78. Step 2
Enable or disable the password reset function. It is enabled
by default.
If the password reset function is disabled, you can find back
the password by the security questions. Make sure you have
configured the security questions.
To Next Page
Loading...