EasyManua.ls Logo

Dahua DHI-ITSJC-2302-DC12 - Wiring; Cable Description

Dahua DHI-ITSJC-2302-DC12
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User’s Manual
7
The Radar can be installed either on the barrier casing or the mounting pole. See
Figure 3-9. For both of the installation methods, the Radar needs to be installed within
50 cm (19.7'') of the barrier arm. Right Width and Left Width should be more than 0.5
m (1.6 ft) to avoid interference from the barrier arm and ensure radar detection
accuracy. You can set the widths on the mobile app STJ79 (see "4.2.1 Setting Radar
Parameters").
Radar installation methods Figure 3-9
Install the Radar on mounting pole Install the Radar on barrier casing
Wiring 3.3
3.3.1 Cable Description
Cable Figure 3-10