User’s Manual
9
4 Configuration on Mobile App
Connecting Your Phone to Radar Wi-Fi 4.1
After connecting the Radar to power, enable WLAN of your phone from Settings > WLAN,
select AWHST_DZ_01 and enter the Wi-Fi password (123456789 by default).
Wi-Fi connection Figure 4-1
Connecting App to Radar 4.2
Scan the QR code provided in the accessory to download and install the STJ79 app, Step 1
and an icon is generated on the desktop of your phone.
Open the app, and then tap WiFi Connection. The app is successfully connected to Step 2
the Radar. Now you can start setting radar parameters.
Tap at the upper-right corner, and then tap Instructions to view help.
To Next Page
Loading...