Need help?Do you have a question about the Dahua DHI-KTP01(S) and is the answer not in the manual?
General| Model | DHI-KTP01(S) |
|---|---|
| Card Reading Type | IC Card |
| Power Supply | DC 12V |
| Do Not Disturb Period | Support |
| RS-485 | Support |
| Exit Button | 1 |
| Door Contact Detect | 1 |
| Lock Control | 1 |
| Working Humidity | 10% to 90% (non-condensing) |
| Operating Humidity | 10% to 90% (non-condensing) |
Defines signal words like WARNING and CAUTION used in the guide.
States compliance with FCC rules and conditions for operation.
Details electrical safety, voltage conformity (SELV), and grounding guidelines.
Highlights critical warnings like modifying default passwords and using specified accessories.
Emphasizes changing passwords and updating firmware for system security.
Suggests regular password changes, secure ports, and updating client software.
Covers ONVIF password changes, port forwarding, and disabling auto-login.
Recommends unique credentials, limiting guest features, and disabling unnecessary services.
Step-by-step guide for surface mounting the VTO outdoor station.
Details requirements and steps for flush mounting the VTO outdoor station.
Guides on setting password, email, and starting the initialization process.
Covers selecting uninitialized devices and entering credentials for initialization.
Details setting the VTH as the main monitor and configuring its IP address.
Guides on setting VTO as primary, IP, date, time, and video standard.
To Next Page