Dahua G26 User Manual

Dahua Bullet Wi-Fi Camera Quick Start Guide
3
Step 6 Select "Yes, go to Wi-Fi Settings" and make sure your smartphone is connected to the
same Wi-Fi, then tap "Next".
Step 7 Fill in the password of your Wi-Fi, then tap "Next".
Step 8 Input your device password, the default password is "admin".
Step 9 Your camera is successfully added. You can set up your time zone and start preview.
Note

If you have more cameras, please follow step 4-9 to add them one by one.

If you want to change the Wi-Fi signal, please reset the camera to factory default and repeat
step 4-9 to add the device
3 Device Installation
Figure 3-1 Figure 3-2
Disclaimer

This quick start guide is for reference only. Minor difference might be found in user interface.

All the designs and software here are subject to change without prior written notice.

All trademarks and registered trademarks mentioned are the properties of their respective
owners.

Please visit our website or contact your local service engineer for more information.
If there is any uncertainty or controversy, please refer to our final explanation.

Dahua G26 Specifications

General

Brand	Dahua
Model	G26
Category	Security Camera
Language	English