Dahua H Series User Manual

Quick Start Guide
3
Alarm output
Log in to webpage, and then configure alarm input and alarm output in alarm setting.
 The alarm input on the webpage is corresponding to the alarm input end of the I/O port.
There will be high level and low level alarm signal generated by the alarm input device
when alarm occurs, set the input mode to "NO" (default) if the alarm input signal is logic
"0" and to "NC" if the alarm input signal is logic "1".
 The alarm output on the webpage is corresponding to the alarm output end of the
device, which is also alarm output end of the I/O port.

Dahua H Series Specifications

General

Brand	Dahua
Model	H Series
Category	Security Camera
Language	English