Do you have a question about the Dahua Lite series and is the answer not in the manual?
Image Sensor | 1/2.7" CMOS |
---|---|
Scanning System | Progressive |
IR On/Off Control | Auto/Manual |
Iris Control | Fixed |
Bit Rate Control | CBR/VBR |
BLC | Yes |
HLC | Yes |
Gain Control | Auto/Manual |
Motion Detection | Yes |
Smart IR | Yes |
Mirror | Yes |
Ingress Protection | IP67 |
Casing Material | Metal |
Max. Resolution | 1920x1080 |
Electronic Shutter Speed | 1/3s~1/100, 000s |
IR Distance | 30m |
Lens Type | Fixed |
Focal Length | 2.8 mm; 3.6 mm |
Field of View (3.6mm) | 87° |
Video Compression | H.265/H.264 |
Smart Codec | H.265+/H.264+ |
Resolution | 1080p (1920 × 1080) |
Day/Night | Auto/Color/B/W |
WDR | DWDR |
White Balance | Auto/Manual |
Noise Reduction | 3D DNR |
Region of Interest(RoI) | Yes |
Image Rotation | 0°, 90°, 180°, 270° |
Privacy Masking | 4 areas |
Ethernet | RJ-45 (10/100 Base-T) |
Interoperability | ONVIF (Profile S, Profile G), CGI |
Browser | Chrome, Firefox |
Management Software | Smart PSS; DSS; DMSS |
Operating Humidity | ≤ 95% |
Power Supply | 12V DC/PoE (802.3af) |
Protocol | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, SMTP, NTP, UPnP, SNMP, 802.1X, QoS, IPv6, Bonjour |
Introduces the functions, installation, and operations of the camera.
Explains signal words (WARNING, CAUTION, TIPS, NOTE) used in the manual.
Conforms to local electrical safety codes and specifies power supply requirements for safe operation.
Provides guidelines for device placement and operation in various environmental conditions to ensure optimal performance.
Details FCC compliance conditions, rules, and measures to prevent harmful interference with radio communications.
Explains the HDCVI standard compliance and the application scenarios for the camera series.
Lists key features including transmission distance, lens capabilities, low-light performance, and output modes.
Presents dimensional drawings and measurements for various camera models (A, B, C, D) in millimeters and inches.
Details different cable ports, their functions, and the operation of the DIP switch for output mode selection.
Step-by-step instructions for securely mounting and connecting the Model A camera to the installation surface.
Step-by-step instructions for securely mounting and connecting Model B (1) and Model B (2) cameras.
Step-by-step instructions for securely mounting and connecting the Model C camera to the installation surface.
Step-by-step instructions for securely mounting and connecting the Model D camera to the installation surface.
Step-by-step instructions for securely mounting and connecting the Model E camera to the installation surface.
Step-by-step instructions for securely mounting and connecting the Model F camera to the installation surface.
Step-by-step instructions for securely mounting and connecting Model G (1) and Model G (2) cameras.
Provides instructions on how to access and navigate the camera's main menu interface through right-clicking.
Guide for configuring audio settings, including enabling audio encode, selecting format, and source for select models.
Details the procedure to access and operate the On-Screen Display (OSD) menu for adjusting camera settings via PTZ.
Provides crucial precautions for device disassembly and guidance for desiccant replacement to maintain performance.
Offers guidelines for cleaning and protecting the camera's lens and mirror surfaces from contamination and damage.
Recommends cleaning methods for the camera body, advising against volatile solvents to preserve coating integrity.