Parameter Description
Memo Describe the user.
Operation Permission
Select authorities as needed.
We recommend you give fewer authorities to normal users
than advance users.
Restricted Login
Set the PC address that allows the dened user to log in to
the camera and the validity period and time range. You can
log in to web with the dened IP in the dened time range
of validity period.
●
IP address: You can log in to web through the PC with
the set IP.
●
Validity period: You can log in to web in the set validity
period.
●
Time range: You can log in to web in the set time range.
Set as following:
1. Select IP Address : Select IP type and set IP address.
IP Address: Enter the IP address of the host to be
added.
IP segment: Enter the start address and end
address of the host to be added.
2. Select Validity Period : Set the begin time and end
time.
3. Select Time Range : Set the time range that allow
user to log in. For details, see "5.1.1.1 Setting Period".
Step 4 Click Save.
The newly added user is displayed in the username list.
Related Operations
●
Edit user information
Click to change password, group, memo, operation authorities, and login authorities.
You can only change the password of the admin.
The methods of changing password vary with dierent accounts.
Login with the admin account, you can change password through Old Password and
Admin Account.
Login with non-admin account (an added account with the permission of user
management), you can change password through Old Password.
Old Password : Change the password through entering the old password to be changed,
and then the new password.
Operation Manual
118
To Next Page
Loading...
