Figure 5-38 Crowd map (2)
5.10 Setting Face Recognition
When a face is detected or recognized in the detection area, the system performs alarm linkage and
supports searching face detection and recognition results.
●
Face Detection: When a face is detected in the area, the system performs alarm linkage, such as
recording and sending emails.
●
Face Recognition: When a face is detected in the area, the system compares the captured face
image with the information in the face database, and links alarm according to the comparison
result.
Figure 5-39 Face recognition owchart
5.10.1 Setting Face Detection
When a face is recognized in the detection area, the system performs alarm linkage.
Prerequisites
Select Setting > Event > Smart Plan, and then enable Face Recognition.
Procedure
Step 1 Select Setting > Face Recognition > Face Detection.
Operation Manual
171
To Next Page
Loading...
