Dahua IPC-HDW1439V-A-IL - Page 132

Step 3 Enter the group name and memo, and then select group authorities.
The default authorities of Admin group include live, playback, storage, le backup, user,
system, system info, manual control, maintenance, peripheral, PTZ, security, network,
event and AV parameters; the default authorities of User group include live and playback.
Table 4-40 Description of user group parameters
Group Authority Admin User Functions
User YES NA
Add, delete and check user/
user group.
Live YES YES Real-time stream view.
Playback YES YES Playback view.
System YES NA
System time setting and
more.
System Info YES NA
Version information, system
logs and more.
Manual Control YES NA PTZ settings.
File Backup YES NA File backup.
Storage YES NA
Storage point conguration,
snapshot recording time
conguration, SFTP
conguration and more.
Event YES NA
Video detection settings,
audio detection settings,
alarm settings and more.
Network YES NA
IP settings, SMTP settings,
SNMP settings, AP Hotspot
settings and more.
Peripheral YES NA
External light, wiper and
serial port settings.
AV Parameter YES NA
Camera property settings,
audio and video settings and
more.
PTZ YES NA
Preset settings, tour settings
and more.
Security YES NA
HTTPS settings, RTSP over
TLS settings and more.
Maintenance YES NA
Automatic maintenance
settings and more.
●
Any user in the Admin group has User authorities to modify group authorities. The
User group does not have this authority.
●
The function of the device corresponds to the authority control respectively. Only user
with specied authority can use corresponding function; the Admin group has all the
authorities.
Operation Manual
121