Dahua IPC-HDW1439V-A-IL - Page 42

Figure 4-16 PTZ limit
Step 2 Adjust the direction buttons, and then click Setting ① to set the up line; click Setting②
to set the down line.
Click Live to view the congured up line and down line.
Step 3 Select the Enable check box to enable the PTZ limit function.
4.3.2.10 Time Task
After setting time task, the camera performs the motions during the congured period.
Prerequisites
You have congured the PTZ motions, including preset, scan, tour, and pattern.
Procedure
Step 1 Select Setting > PTZ settings > Function > Time Task.
Operation Manual
31