Dahua IPC-HDW1439V-A-IL - Page 70

Table 4-16 Description of oodlight settings parameters
Parameter Description
Brightness
Change the value to adjust the oodlight brightness. The higher
the value is, the brighter the oodlight will be.
Color Temperature You can adjust cool or warm color temperature here.
Mode
Floodlight detection modes.
●
Motion Activation: The light turns on when motion is activated.
You can select light duration from 30 s, 60 s, 3 min, 5 min and 15
min. And it is 30 s by default.
●
Manual: The light is o by default. You need to turn it on by
clicking
in the live page. And the light will remain on unless
you click again.
●
Schedule: The light turns on as scheduled. Click Settings next
to Period to set the light schedule.
●
PIR Activation: The light turns on only when PIR is detected at
night. You can select light duration from 30 s, 60 s, 3 min, 5 min
and 15 min. And it is 30 s by default.
Step 3 Click Save.
4.5.1.1.13 Splicing Mode
Select the splicing mode to splice several images of dierent lens to a panoramic image. You can
select Merged Splicing or Splicing for Mode.
Figure 4-47 Splicing mode
4.5.1.2 Prole Management
The surveillance system works in dierent ways as prole congured in dierent time.
Procedure
Step 1 Select Setting > Camera > Conditions > Prole Management.
Operation Manual
59