Procedure
1. Select Setting > Camera > Video > Overlay > Privacy Masking.
2. Select Enable.
3. Click Add, select the masking type, and then draw blocks in image as needed.
Figure 4-57 Privacy masking (2)
Related Operations
●
View and edit the block
Select the privacy masking rule to be edited in the list, then the rule is highlighted, and the block
frame is displayed in the image. You can edit the selected block as needed, including moving
the position, and adjusting the size.
●
Edit the block name
Double-click the name in Name to edit the block name.
●
Delete the block
Click to delete blocks one by one.
Click Clear to delete all blocks.
4.5.2.3.2 Conguring Channel Title
You can enable this function when you need to display channel title in the video image.
Procedure
Step 1 Select Setting > Camera > Video > Overlay > Channel Title.
Operation Manual
68
To Next Page
Loading...
