User Manual of NVR2XXX(-P4-P8) Series NVR
29
2. You can edit the network information and the password of the camera.
Figure 2. 15 Password Configuration of the Camera
3. Click Apply to save the settings and click OK to exit the interface.
Explanation of the icons
Configuring the customized protocols
Purpose:
To connect the network cameras which are not configured with the standard protocols, you can configure the
customized protocols for them.
Steps:
1. Click the Protocol button to enter the protocol management interface.
Figure 2. 16 Protocol Management Interface
There are 16 customized protocols provided in the system, you can edit the protocol name; and choose whether to
enable the sub-stream.
2. Choose the protocol type of transmission and choose the transfer protocols.
Note: The protocol type and the transfer protocols must be supported by the connected network camera.
After adding the customized protocols, you can see the protocol name is listed in the dropdown list, please refer to
To Next Page
Loading...
Need help?
General
