Note:
1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to locate
special frames.
2. About video type bar: represents normal recording (manual or schedule); represents event recording
(motion, alarm, motion | alarm, motion & alarm).
6.1.4 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (e.g. alarm input and
motion detection). Channel switch is supported.
Steps:
1. Enter the Event Search interface.
Menu>Playback>Event
2. Select Alarm Input as the event type.
3. Click Search button to enter the Search Result interface.
Figure 6. 16 Video Search by Alarm Input
If you want to play back recorded files associated with motion detection, choose Motion as event type and
click Search button to enter the Search Result interface.
Figure 6. 17 Video Search by Motion
To Next Page
Loading...
