202
Figure 4-86
Please refer to the following sheet for detailed information.
Please note the above interface may vary due to different protocols. The button is grey and cannot be
selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-84.
4.4.2.1 PTZ Function Setup
Click , you can go to the following interface to set preset, tour, pattern, and scan. See Figure 4-87.
Figure 4-87
Preset Setup
In Figure 4-87, click preset button and use eight direction arrows to adjust camera to the proper position.
To Next Page
Loading...
