151
4) Device pops up following dialog box after it successfully added network cameras. See
Figure 4-23.
Figure 4-23
Step 3 Click YES button to complete smart add operation.
4.1.4.5 Registration
Note
If you skip the smart add function on the startup wizard process, please go to this interface to add the
remote device.
After add remote device, the device can receive, storage, and manage the video streams of the remote
device. You can view, browse, playback, manage several remote devices at the same time.
Step 1 On the P2P interface, click Next button.
Enter remote device interface. See Figure 4-24.
Note
There are two ways to go to Registration interface.
From main menu->Setting->Camera->Registration, you can go to the registration interface.
On the preview interface, right click mouse and then select Registration.
To Next Page
Loading...
Need help?
General
