Dahua NVR41-P Series User Manual

382
Click to draw filter object. See Figure 5-74.
Figure 5-74
Select the blue line and then use mouse to adjust zone size.
Note
Each rule can set two sizes (min size/max size). Once the object is smaller than the min size or larger
than the max size, there is no alarm. Please make sure the max size is larger than the min size.
Click Ok to complete the rule setup.
For detailed setups, please refer to chapter 5.10.3.1.1 motion detect for detailed information.
5.10.3.2.1.2 Intrusion (Cross warning zone)
From main menu->Setup->Event-> Behavior analytics->Behavior analytics, click , and then select rule
type as intrusion, you can see the following interface. See Figure 4-126.
Note:
 System supports customized area shape and amount.
 Support enter/leave/both detection.
 Can detect the moving object operation in the specified zone, customized trigger amount and staying
time.
 Support objects filter function.

Dahua NVR41-P Series Specifications

General

Brand	Dahua
Model	NVR41-P Series
Category	Network Hardware
Language	English