Dahua NVR41-P Series

416
Parameter
Function
Stop bit
The value ranges from 1 to 2. Default setup is 1. Please set according
to the speed dome dial switch setup.
Parity
The options include non/odd/even/space/null. Default setup is none.
Please set according to the speed dome dial switch setup.
5.10.5.5 POS
Connect the NVR to the POS, it can receive the POS information and overlay on the corresponding
record.
Note
POS info overlay and playback function is for 1-window only.
From main menu->Setting->System->POS, you can go to the following interface. See Figure 5-122.
Figure 5-122
Click Add, you can see the following dialogue box. See Figure 5-123.
Figure 5-123
Check the box to enable POS function, Click Set button; you can see the following interface. See Figure
5-124.