Local Basic Operations 55
After adding remote device, the device can receive, store, and manage the video streams of the
remote device. You can view, browse, play back and manage several remote devices at the
same time.
Step 1 On the P2P interface, click Next button.
The REGISTRATION interface is displayed. See Figure 4-27.
There are two ways to go to Registration interface.
Select Main Menu > CAMERA > REGISTRATION > Camera Registration, you
can go to the Camera Registration interface.
On the preview interface, right click mouse and then select Camera Registration.
Figure 4-27
Step 2 Register remote device.
Search and then add
1) Click Device Search.
System displays searched devices at the upper pane.
2) Double-click a remote device, or select a remote device and then click Add to
register it to the Added Device list. See Figure 4-28. Refer to
3) Table 4-7 to set parameters.
The search results do not display the remote camera that has registered to the
system
To Next Page
Loading...
Need help?
General