Chapter 3 Basic Function Introduction
3.1 Main Menu
Under standby interface, press menu button to enter main menu.
1. In main menu, press menu
button, select MIC.
2. Press monitor or unlock button, decrease
or increase MIC volume.
1. In main menu, press menu
button, select call.
2. Press monitor or unlock button,
decrease or increase call volume.
Adjust incoming call
ring volume, or return
call ring of
management center.
1. In main menu, press menu
button, select ring.
2. Press monitor or unlock button,
decrease or increase ring volume.
Adjust local screen
brightness
1. In main menu, press menu
button, select brightness.
2. Press monitor or unlock button,
decrease or increase brightness.
Adjust local screen
contrast
1. In main menu, press menu
button, select contrast.
2. Press monitor or unlock button,
decrease or increase contrast.
1. Please see Ch 3.8.1.1.
1. In main menu, press menu
button, select issue card option.
2. Select issue card.
3. Place empty card in the card
swiping area on VTO. When card is
successfully issued, it will generate DU
sound.
Note:
Please swipe card within 10 minutes after
menu operation, otherwise the session will
expire.
Do not issue more than 30 cards at the same
time.
1. In main menu, press menu
button, select issue card option.
2. Select delete all, to cancel all