Dahua VTH5221D Setup Instruction

Intercom Setup
 VTH status indicator key:
Prerequisites
 Power to the monitor and outdoor station (PoE or DC12V)
 Wired or wireless network
 Windows PC on the network

Step by Step Instructions
Below are several sets of instructions for setting up both the VTO and VTH system in their
respective interfaces.
Wired Instructions
Follow the instructions below for using a wired network (or PoE).
Video Instructions: VTO
VTO2111D-WP
1. Please plug in the appropriate power supply, the VTO2111D-WP can use PoE or a DC
power supply:
 PoE:

Dahua VTH5221D Specifications

General

Display Size	7 inch
Display Type	TFT LCD
Display Resolution	1024 x 600
Operation Method	Touch Screen
Night Vision	Yes
Alarm Input	Yes
Alarm Output	Yes
Power Supply	DC 12V
Operating Temperature	-10°C to +55°C
Operating Humidity	10% to 90%
Material	Plastic
Installation	Wall-mounted
Network Interface	RJ45
Wireless	No
Audio Input	Microphone
Ethernet	10/100 Mbps
Network Protocol	TCP/IP
App Support	DMSS