Dahua VTO2000A Connection Guide

Page14
Copyright © 2017 Dahua Technologies Co., Ltd. All rights reserved.
How to Configure: n VTO+m VTH
①
Master VTH add main VTO. Set room number as 101. Add
VTO2000A in ‘VTO Config’ and enable it.
）
②
Master VTH add sub VTO. Press the icon to switch to sub
VTO configuration. Add sub VTO as the same and enable it.
Note: maximum support 5 VTH (1 main VTH and 4 extension VTH). The master VTH’s room number is set
as 101, and extension VTH’s room number should set as 101-1,101-2,101-3,101-4.
Main VTO Web Config
Main VTH Setup
Sub VTO Web Config
Extension VTH Setup
1
2

Dahua VTO2000A Specifications

General

Brand	Dahua
Model	VTO2000A
Category	Intercom System
Language	English