Dahua VTO6000A User Manual

3.4 Issue Card
Place IC card at the card swiping area to authorize it. User can swipe IC card to unlock
door.
Note:
Some products do not support IC card, please refer to Ch 1.1.
The VTO supports two methods to issue card: platform and WEB. Please refer to Digital
Villa VTO (VTO6 Series) Installation Guide V 1.0.0.
3.5 Compensation of Light
In dark environment or at night, the VTO adopts auto photoreception technology
which achieves light compensation in connecting status.
3.6 Vandal Proof
There is one channel of vandal proof which will generate alarm sound and report to
the manager center once VTO is forced to leave the wall.
3.7 Restore Backup
Restore Card Info
If you encounter abnormality with card info or accidently restore default settings, you can
restore card info with this function.
Restore VTH Info
If VTH info is mistakenly changed, you can restore VTH info with this function.
Note: Every half hour, VTO automatically saves card and VTH info in the system. If you
want to restore card and/or VTH info, you must restore within half hour after your last
operation that change these info.

Dahua VTO6000A Specifications

General

Operating System	Embedded LINUX
Video Frame Rate	25fps
Audio Output	Built-in Speaker
Video Compression	H.264
Audio Compression	G.711
Bidirectional Talk	Support Dual-way Bidirectional Talk
IC Card Reader	Support
Unlock Mode	Remote, password, card
Network Interface	10M/100M Ethernet
Network Protocol	TCP/IP
RS485	Yes
Alarm Output	1 channel
Door Control	Yes
Exit Button	Yes
Door Status Detection	Yes
Card Capacity	10000
Tamper Switch	Yes
Power Supply	DC 12V
Operating Temperature	-30°C to +60°C
Working Humidity	10% to 90% (non-condensing)