Dahua XVR4108C - User Manual

Dahua HDCVI Standalone DVR User’s Manual
Dahua HDCVI Standalone DVR User’s Manual
V2.3.2

Summary

1 FEATURES AND SPECIFICATIONS

1.3 Specifications

Lists detailed technical specifications for various DVR series, including system, video, audio, and port parameters.

2 OVERVIEW AND CONTROLS

2.2 Rear Panel

Details the various ports and connectors available on the rear panel of the DVR for connectivity.

3 INSTALLATION AND CONNECTIONS

3.3 HDD Installation

Provides detailed steps and important notes for installing hard disk drives (HDDs) into the DVR.

3.5 Connecting Video Input and Output Devices

3.7 Alarm Input and Output Connection

Covers the connection procedures for alarm input and output ports, including PTZ decoder connection and grounding.

4 Overview of Navigation and Controls

4.1 Initial Settings

Guides through the initial setup process, including device boot-up and initialization.

4.9 Setting

Covers camera, network, event, storage, and system settings.

5 WEB OPERATION

5.1 Network Connection

5.2 Device Initialization

Guides through setting up a login password for admin and other initial device configurations.

5.3 Login

5.4 Reset Password

Explains how to reset the admin password using email or security questions if forgotten.

5.6 Real-time Monitor

5.7 PTZ

7 FAQ

1. DVR cannot boot up properly.

2. How to restore factory default setup even I cannot login the user interface.

14. Cannot log in client-end or web.

Lists common causes for login failures in client-end or web interfaces and suggests solutions.

16. Network connection is not stable.

36. I connect the standard definition camera to the device, there is no video output.

Dahua XVR4108C Specifications