Dahua XVR4108C User Manual

425
Figure 4- 154
2. Set parameters.

Name: Input customized rule name.

Period: System can generate an alarm once the object in the zone is
missing for the specified period.
 Target filter: Click , you can set filter object size. Each rule can set
two sizes (min size/max size). Once the object is smaller than the min
size or larger than the max size, there is no alarm. Please make sure
the max size is larger than the min size.
3. Left click mouse to draw a zone, until you draw a rectangle, you can right
click mouse.
4. Click OK.
Complete drawing missing object detection rule.
Step 3 Click , it is to set parameters.
Please refer to chapter 4.9.3.3 motion detect to set other parameters.
Step 4 Check the Enable box to enable missing object detection function. Click Apply or
Save to complete setup.
Device begins missing object detection.
4.9.3.7 Face Detect (Optional)

Dahua XVR4108C Specifications

General

Brand	Dahua
Model	XVR4108C
Category	DVR
Language	English