Daihen OTC TURBO PULSE CPDP-350 User Manual

No.P6972
P. 10/ 64

• This welding power source is not suitable for use in the rain.
•
Do not use this welding power source for pipe thawing.
3.3 Applicable welding process and wire size
This welding power source is suitable for the following welding processes.
(1)Standard
Wire size ( in.)
Welding
process
Applicable wire
CPDP-350 CPDP-500
CO2 Solid (Mild steel) 0.035, 0.045 0.045, 0.052, 1/16
Solid (Mild steel) 0.035, 0.045 0.045, 0.052
MAG
Cored (Mild steel) 0.035, 0.045 0.045, 1/16
Pulsed MAG Solid (Mild steel) 0.035, 0.045 0.045, 0.052, 1/16
Stainless steel 0.035, 0.045 0.045, 1/16
Soft aluminum 3/64, 1/16 3/64, 1/16
MIG
Hard aluminum 3/64, 1/16 3/64, 1/16
Stainless steel 0.035, 0.045 0.045, 1/16
Soft aluminum 3/64, 1/16 3/64, 1/16
Pulsed MIG
Hard aluminum 3/64, 1/16 3/64, 1/16
(2)Optional
Wire size (in.) Welding
process
Applicable wire
CPDP-350 CPDP-500
Pulsed MIG Inconel 0.035, 0.045 0.035, 0.045
Soft aluminum 3/64, 1/16 3/64, 1/16
Wave pulse
Hard aluminum 3/64, 1/16 3/64, 1/16
Soft aluminum 3/64, 1/16 3/64, 1/16
Cycle pulse
Hard aluminum 3/64, 1/16 3/64, 1/16
MIG brazing SiBr 0.030, 0.035
CC(Lift start TIG)
Stick

Daihen OTC TURBO PULSE CPDP-350 Specifications

General

Brand	Daihen
Model	OTC TURBO PULSE CPDP-350
Category	Welding System
Language	English