Need help?Do you have a question about the Daikin 2MXM40A2V1B9 and is the answer not in the manual?
General| Model | 2MXM40A2V1B9 |
|---|---|
| Cooling Capacity | 4.0 kW |
| Heating Capacity | 4.5 kW |
| Refrigerant | R32 |
| Outdoor Unit Dimensions (HxWxD) | 550 x 765 x 285 mm |
| Maximum Piping Length | 30 m |
| Maximum Height Difference | 15 m |
| Operating Range Cooling | -10 to 46°C |
| Operating Range Heating | -15 to 18°C |
| Power Supply | 220-240V, 50Hz |
| Sound Power Level Cooling | 61 dBA |
| Sound Power Level Heating | 62 dB(A) |
| Connections Liquid | 1/4 inch |
| Connections Gas | 3/8 inch |
| Type | Split System Air Conditioner |
Provides introductory information about the installation manual.
Safety instructions and precautions for installing the outdoor unit.
Safety guidelines for selecting and preparing the installation site.
Safety precautions for connecting refrigerant piping.
Safety warnings related to handling R32 refrigerant.
Safety requirements for electrical connections.
Details about the outdoor unit and its included accessories.
Guidelines for selecting and preparing the outdoor unit installation site.
Instructions and considerations for mounting the outdoor unit.
Requirements and guidelines for preparing refrigerant piping.
Steps and precautions for connecting refrigerant piping.
Procedures for checking refrigerant piping for leaks and vacuum.
Information on R32 refrigerant properties and handling.
Method to calculate the additional refrigerant needed based on piping length.
How to calculate the total refrigerant charge for a complete recharge.
Instructions for charging additional refrigerant into the system.
Guidance on filling and affixing the refrigerant gas label.
Details on standard wiring components used in the installation.
Step-by-step instructions for connecting electrical wiring to the outdoor unit.
How to disable input control signals for ECONO mode.
Instructions for enabling the night quiet mode for reduced noise.
How to limit the unit operation to heat mode only.
Enabling the standby electricity saving function for energy efficiency.
Items to check before starting the commissioning process.
Checks to perform during the commissioning process.
Procedures for trial operation and testing the installed unit.
A checklist for routine maintenance and inspection tasks.
Information on the wiring diagram and its legend.
To Next Page