Daikin Altherma 3 H HT F - Page 222

10 | Configuration
Installer reference guide
222
EPRA14~18D + ETVH16SU18+23E
Daikin Altherma 3 H HT F
4P644738-1A – 2022.03
2 On the user interface, go to [9.N] Export MMI settings.
3 Select OK.
4 Remove the USB memory stick and close the user interface
panel.
—
Bizone kit
Bizone kit installed
# Code Description
[9.P.1] [E-0B] Bizone kit installed:
▪ 0 No : The system only has a main zone.
▪ 1 N/A
▪ 2 Yes: A bizone kit is installed in order to add
an additional temperature zone.
Bizone kit system type
# Code Description
[9.P.2] [E-0C] Bizone system type
▪ 0 Without hydraulic separator / no
direct pump
b
a
▪ 1 With hydraulic separator / no
direct pump
b
a
c
▪ 2 With hydraulic separator / with
direct pump
dc
b
a
a:Indoor unit; b:Mixing station; c:Hydraulic
separator; d:Direct pump