Daikin Altherma 3 H HT F - To Install the Outdoor Unit

7 | Unit installation
Installer reference guide
75
EPRA14~18D + ETVH16SU18+23E
Daikin Altherma 3 H HT F
4P644738-1A – 2022.03
NOTICE
Level. Make sure the unit is level. Recommended:
Use 4 sets of M12 anchor bolts, nuts and washers. Provide at least 150mm of free
space below the unit. Additionally, make sure the unit is positioned at least
100mm above the maximum expected level of snow.
Anchor points
800
(mm)
479
Pedestal
When installing on a pedestal, make sure that the discharge grille still can be put in
its safety position. See "7.3.7To remove the discharge grille, and put the grille in
safety position"[479].
800
479
a
≥150
(mm)
4× M12
a Make sure not to cover the drain hole in the bottom plate of the unit.
7.3.4 To install the outdoor unit
CAUTION
To avoid injury, do NOT touch the air inlet or aluminium fins of the unit.