Daikin Altherma 3 H HT Series - Finishing Outdoor Unit Installation; Closing the Outdoor Unit Cover; Installing the Discharge Grille

6 Finishing the outdoor unit installation
Installation manual
14
EPRA14~18DAV3+W1
Daikin Altherma 3 H HT
4P586100-1B – 2019.09
6 Finishing the outdoor unit
installation
6.1 To close the outdoor unit
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1N•m.
1
1
2
32
4
4
3
3×
3
1
6.2 To install the discharge grille
Install the lower part of the discharge grille
1 Insert the hooks.
2 Insert the ball studs.
1
2
3 Fix the 2 lower screws.
3
2×
Install the upper part of the discharge grille
NOTICE
Vibrations. Make sure the upper part of the discharge
grille is attached seamlessly to the lower part to prevent
vibrations.
4 Align and attach the left side.
5 Align and attach the middle part.
6 Align and attach the right side.
5
4
6
7 Insert the hooks.
8 Insert the ball studs.
8
7
9 Fix the 6 remaining screws.
9
6×