Daikin ALTHERMA HT EKBUHAA6 V3

To Next Page

To Previous Page

ESIE09-08A Field Setting

Test Operation 91

C Leaving water temperature limits

00 Set point: leaving water maximum temperature 80 37~80 1 °C

01 Set point: leaving water minimum temperature 25 25~37 1 °C

02 Not applicable. Do not change the default value. 20 18~22 1 °C

03 Not applicable. Do not change the default value. 5 5~18 1 °C

D Domestic water heating retention times

00 Set point: minimum time for domestic water

heating

10 5~20 1 —

01 Set point: maximum time for domestic water

heating

30 10~60 5 —

02 Set point: interval minimum stop time of

domestic water heating

15 5~30 5 —

E Service mode

00 Vacuum mode 0 0/1 — —

01 Not applicable. Do not change the default value. 0 (OFF) 0/1 — —

02 Not applicable. Do not change the default value. 0 (OFF) 0/1 — —

03 Not applicable. Do not change the default value. 1 0~2 1 —

04 Pump only operation 0 0~2 1 —

First

code

Second

code Setting name

Installer setting at variance with

default value

Default

value Range Step UnitDate Value Date Value

Daikin ALTHERMA HT EKBUHAA6 V3 - Page 103