Field Setting ESIE09-08A
122 Test Operation
Push the SET button and match with the LEDs No. 1 - 15, push the RETURN button, and confirm the
data for each setting.
Data such as addresses and number of units is expressed as binary numbers; the two ways of
expressing are as follows:
The No. 1 cool/heat unified address is expressed as a binary number
consisting of the lower 6 digits. (0 - 63)
In the address is 010110 (binary number), which translates to 16 + 4 +
2 = 22 (base 10 number). In other words, the address is 22.
To Next Page
Loading...
