Daikin BRC082A41W Installation Manual

6 ■English
Example
If the time to clean air lter is set to “Filter Contamination-Heavy”, set Mode No. to “10”, First code No. to “0”, and Second code No.
to “02”.
Mode
No.
First
code
No.
Description of setting
Second code No.
01 02 03
10
0
Sets operation time until AIR FILTER
CLEANING TIME INDICATOR lamp
lights up. (When dirt and dust levels
are high, change the setting to “Filter
Contamination-Heavy”.)
Long-life
lter
Light
±2,500
hrs.
Heavy
±1,250
hrs.
—
3
Changes AIR FILTER CLEANING TIME
INDICATOR lamp on/off settings.
On Off —
13
0
Setting air outlet velocity.
This setting is to be changed in function of ceiling
height (H).
≤8-7/8ft
(≤2.7m)
8-7/8<H≤9-13/16ft
(2.7<H≤3.0m)
9-13/16<H≤11-1/2ft
(3.0<H≤3.5m)
1
Selection of air ow direction.
This setting is to be changed when blocking pad
optional kit is used.
4-way ow 3-way ow 2-way ow
4
Airow direction range setting.
This setting is to be changed when range of swing
ap movement needs to be changed.
Upper Medium Lower
NOTE
Factory settings of the Second code No. are marked in grey backgrounds.
Do not use any settings not listed in the table.
For group control with a wireless remote controller, initial settings for all the indoor units of the group are equal.
(For group control, refer to the installation manual supplied with the indoor unit for group control.)
01_EN_3P444567-1.indd 6 7/5/2016 11:05:30 AM

Daikin BRC082A41W Specifications

General

Brand	Daikin
Model	BRC082A41W
Category	Remote Control
Language	English