6
1.Mode Selector button
Use to select the operation mode of your
preference. (Refer to page 11.)
*$YDLODEOHPRGHVYDU\ZLWKWKHFRQQHFWLQJ
model.
2.$LUÀRZ6HWWLQJEXWWRQ
8VHGWRLQGLFDWHWKH$LUÀRZ5DWH$LU
9ROXPH)DQ6SHHG$LUÀRZ'LUHFWLRQ
screen. (Refer to page 12.)
*$YDLODEOHIDQVSHHGDQGDLUÀRZGLUHFWLRQ
YDU\ZLWKWKHFRQQHFWLQJPRGHO
3.Menu/Enter button
Used to indicate the Main Menu.
(Refer to page 23 for the menu items.)
Used to enter the setting item selected.
4.Up button " "
Used to raise the set temperature.
Use to highlight the item above the current
selection.
7KHKLJKOLJKWHGLWHPVZLOOEHVFUROOHG
FRQWLQXRXVO\ZKHQWKHEXWWRQLVNHSW
pressed.)
Used to change the item selected.
*%HVXUHWRSUHVVWKHSDUWZLWKWKHV\PERO
"
"
5.Down button " "
8VHGWRORZHUWKHVHWWHPSHUDWXUH
8VHWRKLJKOLJKWWKHLWHPEHORZWKHFXUUHQW
selection.
7KHKLJKOLJKWHGLWHPVZLOOEHVFUROOHG
FRQWLQXRXVO\ZKHQWKHEXWWRQLVNHSWSUHVVHG
Used to change the item selected.
*%HVXUHWRSUHVVWKHSDUWZLWKWKHV\PERO
" "
6.Right button " "
Used to highlight the next items on the
right-hand side.
Display contents are changed to next
screen per page.
*%HVXUHWRSUHVVWKHSDUWZLWKWKHV\PERO
"
"
7.Left button " "
Used to highlight the next items on the
left-hand side.
Display contents are changed to previous
screen per page.
*%HVXUHWRSUHVVWKHSDUWZLWKWKHV\PERO
"
"
8.ON/OFF button
3UHVVWKLVEXWWRQDQGV\VWHPZLOOVWDUW
3UHVVWKLVEXWWRQDJDLQDQGV\VWHPZLOO
stop.
9.Operation lamp (Green)
This lamp lights up during operation.
This lamp blinks if a malfunction occurs.
10.Cancel button
Used to return to the previous screen.
11.LCD (with backlight)
7KHEDFNOLJKWZLOOEHOLWIRUDSSUR[LPDWHO\
30 seconds by pressing any operation
EXWWRQ3UHVVWKHEXWWRQZKLOHWKHEDFNOLJKW
is lit. (Excluding the ON/OFF button)
If 2 remote controllers are used to control a
VLQJOHLQGRRUXQLWWKHEDFNOLJKWRIWKH
UHPRWHFRQWUROOHUDFFHVVHG¿UVWZLOOEHOLW