Daikin DCS601C51 User Manual (English)

Other manuals for Daikin DCS601C51

Questions and Answers:

E
Emily PowersAug 16, 2025
How to reset Daikin DCS601C51 Controller when it is not working?
- C
  Christine SmithAug 16, 2025
  If the intelligent Touch Controller cannot be operated or monitoring isn't available, try the following: First, press and hold the reset button on the left screen for 5 seconds. If that doesn't work, press the RESET button with a thin shaft-like object. Also, discharge any static electricity from your body by touching a grounded metal object before operating the Daikin Controller.
H
herreradawnAug 19, 2025
How to adjust brightness on Daikin DCS601C51 Controller?
- J
  Jessica SalasAug 19, 2025
  If you want to adjust the screen brightness, contrast, and buzzer sound on your Daikin intelligent Touch Controller, use a Phillips head screwdriver to adjust the volume (variable resistor) on the left side of the controller while checking each level.
J
Jacob RyanAug 22, 2025
How to turn on Daikin DCS601C51 display?
- M
  Melissa GrantAug 22, 2025
  If the display of your Daikin intelligent Touch Controller has gone out, touch the screen with the pen provided to turn the display back on.
J
juliachapmanAug 25, 2025
Why doesn't the backlight go off on my Daikin Controller?
- F
  Franklin DixonAug 25, 2025
  The backlight of your Daikin Controller will not automatically turn off if the display is set to 'Set/Prop', 'System Setup', etc.
K
Kevin JohnsonAug 27, 2025
What to do if Daikin Controller touch screen is not responding?
- C
  cperezAug 27, 2025
  If touching the screen of the Daikin intelligent Touch Controller doesn't change the display right away, it may take some time depending on the communication status with the connected air conditioners. The update should complete in a few seconds.
P
Patrick AcostaAug 30, 2025
What to do if the Daikin DCS601C51 Controller fails and remote control is disabled?
- J
  John MasonAug 31, 2025
  If the Daikin Controller fails while the remote control is disabled, preventing start/stop settings for the air conditioners, temporarily turn off the power supply breaker of the intelligent Touch Controller until service personnel can investigate.
H
Hayley DavisSep 2, 2025
Why does my Daikin DCS601C51 screen flicker?
- W
  Whitney WallSep 2, 2025
  It is normal for the Daikin Controller screen to flicker at a regular interval. The Monitoring screen updates every 3 seconds to show the latest status of the air conditioners.
W
walkermelissaSep 6, 2025
Why does my Daikin Controller buzzer sound when I press an area not allocated for a button?
- L
  lorimarshSep 6, 2025
  If you hear a buzzer sound when pressing an area not allocated for a button on the Monitoring screen of your Daikin Controller, this is normal.
N
Nicholas HernandezSep 8, 2025
Why does the buzzer sound break up on my Daikin DCS601C51?
- J
  Javier McdonaldSep 8, 2025
  If the buzzer sound breaks up on your Daikin Controller, it may occur when the load on the CPU is particularly large, but this is not a problem.