What to do if the Daikin Controller web interface is slow to refresh?
If the Daikin Controller web interface is taking too long to refresh, it may be because the network is congested. In this case, wait for a while and then access it again.
What does it mean when the Daikin Controller says a communication error occurred?
If you see a dialog box stating that a communication error occurred and you cannot operate the air conditioners from your PC, check the following: * Your PC is not cabled correctly to the intelligent Touch Controller. * The intelligent Touch Controller is turned off.
What to do if Java plugin does not work correctly with Daikin Controller?
If the Java plugin does not work correctly, it might be due to: * Java plugin is not installed correctly. * The version of the installed Java plugin is not supported. * The latest version may not be supported. Refer to “BEFORE STARTING” for more information.
Why are my Daikin DCS004A51 air conditioners running when I didn't start them from the web interface?
Your Daikin Controller air conditioners might be running even if you didn't start them via the web interface because: * They were started using local remote controllers. * They were started from the intelligent Touch Controller console or any centralized controller. * A schedule program set via the web interface started the conditioners. * The Temperature Limit function of the intelligent Touch Controller started the air conditioners. This function prevents room temperature from becoming extremely high or low by automatically starting air conditioners when a specified temperature threshold is exceeded. For more information, refer to the intelligent Touch Controller operation manual.
Why are my Daikin DCS004A51 Controller air conditioners not working even though I didn't turn them off on the web interface?
Your Daikin Controller air conditioners may not be operational even if you did not click the stop button on the web interface due to the following reasons: * The air conditioners were stopped using the local remote controllers. * The air conditioners were stopped from the intelligent Touch Controller console or any centralized controller. * A power failure occurred. * A schedule program set via the web interface stopped the air conditioners. * The Heating Optimization function of the intelligent Touch Controller stopped the conditioners. For more information, refer to the intelligent Touch Controller operation manual.
What to do if I can't access the Daikin intelligent Touch Controller web interface?
If you cannot access the intelligent Touch Controller web interface, the issue might be due to: * Your PC is not correctly connected to the network. * The intelligent Touch Controller address entered in the browser is incorrect. * The intelligent Touch Controller is turned off. * The network is congested. If the network is congested, wait for a while and then try to access it again.
Why did the temperature setting change on my Daikin DCS004A51 when I didn't change it on the web interface?
The temperature setting and/or operation mode of your Daikin Controller air conditioner might have changed, even if you didn't adjust it on the web interface, because: * The settings were changed using the local remote controllers. * The settings were changed from the intelligent Touch Controller console or any centralized controller. * A schedule program set via the web interface changed the settings. * The Change Over function of the intelligent Touch Controller changed the settings. This function maintains optimal room temperature by automatically changing the operation mode and/or temperature setting according to the changing environment conditions. For more information, refer to the intelligent Touch Controller operation manual.
General| Brand | Daikin |
|---|---|
| Model | DCS004A51 |
| Category | Controller |
| Language | English |
To Next Page