6 English
If the Administrator attempts to log into the web interface
without closing the system menu on the intelligent Touch
Controller console, the error message ((2) in the figure)
appears. In this case close the system menu, and log into
it again.
If the Administrator, who is logging into the web interface,
attempts to log into the web interface via another PC, the
error message ((3) in the figure) appears. The Administrator
cannot log into the web interface via multiple PC at a time.
4-5 Selecting Display Language
To select a display language to be used for the web interface:
1.Click the “” button (1) to display the Display
language setting screen (Screen 2).
2.Click the “” or “” button to select a language
to be used in this screen.
3.Select a language to be used in the web interface by clicking
a radio button (2).
4.To reflect your selection, click the “”.
To cancel your selection, click the “”.
figure (2)
figure (3)
(1)
Screen 1: Authentication screen
(2)
Screen 2: Display language setting screen
01_EM04A057_EN.fm Page 6 Tuesday, February 1, 2005 7:47 PM
To Next Page
Loading...
