To Next PageTo Next PageWhat causes Daikin Chiller error code UA?
Daikin Chiller error code UA indicates a type connection problem. Wait until the initialization between the outdoor module and hydro module is finished (after power ON, wait at least 12 minutes). If the issue persists, contact your local dealer.
What causes Daikin Chiller error code A1?
Daikin Chiller error code A1 indicates a failure of writing memory (EEPROM error). Contact your local dealer.
What does Daikin Chiller error code C1 mean?
Daikin Chiller error code C1 indicates bad ACS communication. Contact your local dealer.
Warnings about handling electrical parts and hot/cold components.
Notes on closed water systems and corrosion prevention.
Details on earth connection, dedicated circuits, and capacitor use.
Guidance on lifting and leveling the unit on its foundation.
Guidelines for connecting water pipes and preventing issues.
Guidelines for connecting water pipes, sealants, and regulators.
Checking water volume and adjusting expansion vessel pre-pressure.
Methods for preventing freezing, including heater tape and glycol.
Information on glycol concentration and precautions.
Checklist for ensuring installation is complete and correct.
Accessing and programming field settings via the remote controller.
Step-by-step guide to changing field settings on the remote controller.
Final checks before unit startup.
Procedure for performing unit test runs.
Steps to perform test runs for heating and cooling.
Final steps before handing over the unit to the user.
Function for lowering room temperature during specific times.
Explains all buttons and icons on the remote controller.
Procedure to set the clock and schedule timer.
Setting operation based on outdoor temp for heating.
Steps to program and view schedule timer actions.
Steps to program space cooling or heating schedule timer.
Steps to program space cooling settings.
Steps to program space heating settings.
Steps to change field settings on the remote controller.
Lists all field settings, defaults, and ranges.
Continuation of the field settings table.
Guidelines for solving common problems.
General