Daikin FAY71FAVE - Procedure to Remove PCB

Si211309E Procedure to Remove PCB
Removal Procedure 5
4. Procedure to Remove PCB
Procedure Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure Points
∗Remove the outer panels
according to the procedure
for removing the electrical
parts box.
1
Disconnect the front
side wiring connector
connected to the PCB.
2
Disconnect the PCB
from the tabs by
pushing it inward. Draw
the PCB out partly and
disconnect the
remaining connectors.
The tape holding the electrical
parts box and PCB is for
transport, and is unnecessary
when reinstalling.
3
Completely remove the
PCB.
Red
Fan motor connector
yellow
Tabs
LED lamps (green)