Daikin FCQ18PVJU - Page 61

SiUS28-902_a Field Setting
Test Operation 54
How to Select
Operation Mode
Whether operation by remote controller will be possible or not for turning on/off, controlling
temperature or setting operation mode is selected and decided by the operation mode shown in
the right column of the following table.
Do not select “timer operation possible by remote controller” if not using a remote controller.
Operation by timer is impossible in this case.
∗1. Factory setting
ON by remote
controller
(Unified ON by
central remote
controller)
OFF by remote
controller
(Unified OFF by
central remote
controller)
Temperature
control by
remote controller
Operation mode
setting by
remote controller
OFF by
remote
controller
Control
mode is "1."
Example
↓
Rejection
↓
Rejection
↓
Rejection
↓
Acceptance
↓
Acceptance
Control mode
Control by remote controller
Control mode
Operation
OFF
Temperature
control
Operation
mode setting
Unified operation,
individual operation
by central remote
controller, or
operation controlled
by timer
Unified OFF,
individual stop by
central remote
controller, or timer
stop
ON/OFF control
impossible by
remote controller
Rejection (Example)
Rejection (Example)
Rejection
(Example)
Rejection
Acceptance 0
Rejection 10
Acceptance
(Example)
Acceptance
(Example)
1(Example)
Rejection 11
OFF control only
possible by
remote controller
Acceptance
Rejection
Acceptance 2
Rejection 12
Acceptance
Acceptance 3
Rejection 13
Centralized
Acceptance
Rejection
Acceptance 4
Rejection 14
Acceptance
Acceptance 5
Rejection 15
Individual Acceptance
Rejection
Acceptance 6
Rejection 16
Acceptance
Acceptance 7 ∗1
Rejection 17
Timer operation
possible by
remote controller
Acceptance
(During timer at ON
position only)
Rejection
(During timer at OFF
position)
Rejection
Acceptance 8
Rejection 18
Acceptance
Acceptance 9
Rejection 19
remote controller is not possible,