Daikin FCQ18PVJU - Page 63

SiUS28-902_a Field Setting
Test Operation 56
Display for malfunction/preparing/test-run
k: ON h: OFF l: Blink
Setting (displaying) item
LED display example
H1P H2P H3P H4P H5P H6P H7P
Normal
hhkhhhh
Malfunction
hkkhhhh
Preparing/Test-run
hlkhhhh
a. “Setting mode 1”
Normally, “Setting mode 1” is set. In
case of other status, push MODE
button (BS1) one time and set to
“Setting mode 1”.
∗ The current state is displayed.