Need help?Do you have a question about the Daikin FFQ-Q Series and is the answer not in the manual?
General| Series | FFQ-Q |
|---|---|
| Energy Efficiency Ratio (EER) | Varies by model |
| Seasonal Energy Efficiency Ratio (SEER) | Varies by model |
| Coefficient of Performance (Heating) | Varies by model |
| Power Supply | 220-240V |
| Airflow Rate | Varies by model |
| Noise Level (Indoor Unit) | Varies by model |
| Noise Level (Outdoor Unit) | Varies by model |
| Operating Temperature (Cooling) | Varies by model |
| Operating Temperature (Heating) | Varies by model |
| Indoor Unit Dimensions (HxWxD) | Varies by model (e.g., FFQ25Q/35Q/50Q/60Q/71Q: 256 x 840 x 840 mm, FFQ100Q/125Q/140Q: 298 x 1170 x 690 mm) |
| Outdoor Unit Dimensions (HxWxD) | Varies by model |
| Indoor Unit Weight | Varies by model |
| Outdoor Unit Weight | Varies by model |
Provides detailed measurements and diagrams for the indoor unit.
Details the dimensions and installation points for the wired remote controller.
Shows dimensions and receiver installation for the wireless remote controller.
Illustrates the dimensions and installation of a wireless remote controller.
Illustrates the electrical connections for the indoor unit.
Details the electrical wiring connections for the outdoor unit.
Shows the refrigerant piping connections for the indoor unit.
Illustrates the refrigerant piping layout for the outdoor unit.
Provides correction factors for piping length for 09/12 and 15 class models.
Shows cooling and heating operation limits based on indoor/outdoor temperatures.
Describes the standard conditions and locations for sound level measurements.
Presents sound pressure level data for different indoor units across frequencies.
Displays sound pressure level data for outdoor units across frequencies.
Comprehensive guide for installing the indoor unit and its components.
Critical safety precautions for product installation.
Guidelines for selecting the appropriate location for unit installation.
Detailed instructions for handling refrigerant piping and connections.
Steps for preparing and installing the decorative panel.
Procedures for conducting trial operation and testing the system.
Steps for preparing the decoration panel before mounting it.
Instructions for attaching the decoration panel to the indoor unit.
Safety precautions for using the wired remote controller.
Step-by-step guide for installing the wired remote controller.
Essential safety precautions for operating and installing the wireless remote controller.
Steps to set the wireless address and configure the remote controller.
Critical safety precautions for installing the outdoor unit.
Guidelines for choosing an appropriate and safe location for the outdoor unit.
Specifies the necessary clearances around the outdoor unit for proper installation.
Identifies and labels the main parts of the indoor and outdoor units.
Instructions for cleaning the various parts of the unit.
Guides to identify and resolve common operational issues and errors.
Guide for operating the unit in different modes like Cool, Heat, Auto, and Fan.
Instructions for operating the unit in Dry mode for dehumidification.
Explanation of the Setback function for maintaining temperature in unoccupied periods.
How to configure airflow direction settings for the unit.
Instructions for setting airflow direction individually for each louver.
Details on configuring ventilation rate and mode settings.
Instructions for setting up operational schedules for the unit.
Lists optional accessories available for the indoor unit.
Lists optional accessories available for the outdoor unit.
Details the installation of the wiring adaptor kit.
Instructions for installing the snow hood on the intake side plate.
To Next Page
