Daikin FFQ-Q Series - KRP1 BA101> Installation Box for Adaptor PCB

EDUS091617 Option List
Split Type Air Conditioners FFQ-Q Series 165
13.5 <KRP1BA101> Installation Box for Adaptor PCB
•
Detach the aluminum tapes of the installation box 1 to insert the PCB
Attach the adaptor
Method of attaching the adaptor
Attach the adaptor in the installation box 1 by the PCB supports.
(PCB supports are accessories of adaptor.)
Quantity
KRP1BA101
Screw
Englishx1, Japanesex1
KRP1B101
1
4
Installation manual
(This manual)
3
2
x3
Clamp
x2
x3
Cord sticker
English
Installation box
x1
76
x3
Name
Shape
5
Screw
x1
Lid of
installation box
Accessories
Check the following accessories are included in this kit.
•
Connect wires with the adaptor before attaching to the installation box 1 .
•
Low voltage wires and high voltage wires should be kept space at least 50 mm from each other.
(Accessory of adaptor)
Low voltage wire
PCB support
Adaptor PCB
Aluminum tape
Aluminum tape
Hole for low voltage wire
(Signal line)
Hole for high voltage field wire
Installation box 1