Option List EDUS091617
172 Split Type Air Conditioners FFQ-Q Series
13.8 <KDBQ44BA60A> Panel Spacer
Preparation of the decoration panel
Installation of the indoor unit
Caution
• Refer to the installation manual for both indoor
• When the Panel Spacer is installed
,
it is not possible
to have 2-way air outlet.
unit and the Panel spacer for its installation.
• Handle the decoration panel with care.
Adjust the height of the indoor unit.
(
1
)
Remove the suction grill from the decoration panel.
(
2
)
Place the panel face down on the corrugated board or the vinyl sheet
Never place the panel face down
,
or lean the panel against wall or place on the
(
It causes the dent or damage of the surface of the panel or damage of swing motor.
)
projective object.
Be sure the piping will not contact with the ceiling joist etc. after adjusting the height.
(
Refer to the installation manual of the decoration panel how to remove.
)
to protect the surface of the panel.
False ceiling
Standard installation
Hanger
bracket
(
180mm
)
285mm
Contents of kit
Check if following parts are included with your kit.
Shape · number
Quantity
Quantity
Name
Name Panel spacer frame
5
1
4 PCS.
2 PCS.
Sealing material
When the Panel spacer is installed
Resin corner part
6
False ceiling
2
4 PCS.
2 PCS.
Fixing metal
3
4 PCS.
Tapping screw
4
M4×12
Hanger
bracket
(
Class 2
)
28 PCS.
Screw
(
140mm
)
245mm
255mm or more
Shape · number
To Next Page
Loading...
