Daikin FT35CV1A - Advanced Operation Features; Adjusting Airflow Direction

12
Adjusting the Air Flow Direction
You can adjust the air flow direction to increase your comfort.
■
To adjust the horizontal
blades (flaps)
1. Press “SWING button”.
•“ ” is displayed on the LCD.
2. When the flaps have reached the
desired position, press “SWING
button” once more.
The flaps will stop moving.
■
To adjust the vertical
blades (louvers)
Hold the knob and move the louvers.
(You will find a knob on the left-side and the right-side blades.)
Notes on flaps and louvers angles
• When “
SWING button
” is selected, the flaps
swinging range depends on the operation mode.
(See the figure.
)
■
■■
■
ATTENTION
• Always use a remote controller to adjust the flaps
angle. If you attempt to move it forcibly with hand
when it is swinging, the mechanism may be broken.
• Be careful when adjusting the louvers. Inside the
air outlet, a fan is rotating at a high speed.
C
TEMP
ON/OFF
MODE
ON
OFF
TIMER
FAN
SWING
CANCEL
POWERFUL
1, 2
ON
See P6 for button names.
0˚
25˚
20˚
45˚
In COOL or DRY mode
In FAN mode
When stop operation
Upper limit
Lower limit
When stop operation
Upper limit
Lower limit
01_EN_3P132108-4F.fm Page 12 Monday, June 27, 2005 5:38 PM