Need help?Do you have a question about the Daikin FTE60LV16 and is the answer not in the manual?
Open front panel, push filter knob, unfasten hooks, and pull filter downward.
Push filter bottom to unfasten hooks and remove the filter.
Open panel further, release shafts, and remove the front panel.
Remove the screw and detach the service cover.
Remove screws and unfasten hooks to detach the front grille.
Open blades, release shafts, and slide to remove.
Release shafts, unfasten hooks, and pull blades rightward.
Remove screws, disconnect wires, and dislocate the electrical box.
Remove shield plates, signal receiver units, and control PCBs.
Remove motors for horizontal and vertical blades by unscrewing.
Disconnect drain hose and unscrew flare nuts for gas and liquid piping.
Detach the indoor unit from the installation plate.
Unfasten hooks, widen auxiliary piping, and pull out the heat exchanger.
Remove screws and lift the right side plate.
Remove fixing plate, screws, and side plates to detach fan motor and rotor.
General| Brand | Daikin |
|---|---|
| Model | FTE60LV16 |
| Category | Air Conditioner |
| Language | English |
To Next Page