EasyManua.ls Logo

Daikin FTE50KV14 - User Manual

Daikin FTE50KV14
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REMOVAL
PROCEDURE
SERVICE MANUAL
Indoor Unit
Inverter / Non-Inverter
Wall Mounted Type
5.0/6.0/7.1 kW Class
15000/18000/24000 Btu/h Class
Si041142
Question and Answer IconNeed help?

Do you have a question about the Daikin FTE50KV14 and is the answer not in the manual?

Summary

Removal of Air Filters and Front Panel

Remove Air Filters

Steps to remove the air filters from the indoor unit, including unfastening hooks.

Remove Titanium Apatite Photocatalytic Air-Purifying Filters

Procedure for removing the special air-purifying filters from the unit.

Remove Front Panel

Instructions for detaching and removing the front panel of the indoor unit.

Removal of Front Grille

Remove Service Cover

Steps to remove the service cover before accessing the front grille.

Remove Front Grille

Procedure to unfasten hooks and remove the front grille from the unit.

Removal of Horizontal and Vertical Blades

Remove Horizontal Blades

Instructions for removing the horizontal air direction blades from the unit.

Remove Vertical Blades

Procedure for detaching and removing the vertical air direction blades.

Removal of Electrical Box, PCBs, and Swing Motors

Remove Electrical Box

Steps to safely disconnect and remove the main electrical control box.

Remove PCBs

Procedure for removing various printed circuit boards (PCBs) from the unit.

Remove Swing Motor for Horizontal Blades

Instructions for removing the swing motor assembly for horizontal air direction.

Remove Swing Motor for Vertical Blades

Procedure for removing the swing motor assembly for vertical air direction.

Removal of Indoor Heat Exchanger

Disconnect Refrigerant Piping

Steps to safely disconnect refrigerant lines before heat exchanger removal.

Remove Indoor Unit

Procedure for detaching the indoor unit from the installation plate.

Remove Indoor Heat Exchanger

Procedure for unfastening hooks and lifting out the indoor heat exchanger.

Removal of Fan Motor and Fan Rotor

Remove Right Side Plate

Steps to remove the right side panel to access internal components.

Remove Fan Motor Fixing Plate

Procedure to remove the plate securing the fan motor.

Remove Fan Rotor

Instructions for removing the fan rotor from the unit.

Remove Left Side Plate and Bearing

Steps to remove the left side plate and the motor bearing.

Daikin FTE50KV14 Specifications

General IconGeneral
BrandDaikin
ModelFTE50KV14
CategoryAir Conditioner
LanguageEnglish

Related product manuals